Course Content
Review Design
It's always best to start with a plan. Here's what to look for before starting installation.
0/4
Prewire
Prewire involves routing and pulling wires from the panels to the lights, switches, and devices, as well as wiring from main AC or DC power sources to the panels.
0/4
Trim and Basic Commission
Trim Phase includes connecting lights and switches, grouping lights into zones, pairing switches to lighting zones, configuring occupancy sensors, and assigning keypad/touchpad button actions. Cleaning and trimming the panels. This is usually the last step required for final inspections.
0/2
Accessing via Wifi and Basic Controls
Accessing via Wifi, naming devices and zones, connecting to home wifi, controlling lights, testing switches and sensors.
Installing ReNetA
About Lesson

We believe lighting control should be as easy and intuitive as the common light switch.  So ReNetA light switches look and work just like simple wall switches.

But why hide the fact that it’s a powerful and smart lighting control system!  In this case, Smart is even easier than traditional AC light switches. With ReNetA, switches are simply buttons that tell the system that you want to turn On, Off, Dim, or Raise lights.

Buttons can also recall Scenes: groups of lights each at a pre-set level, but that’s for another chapter…

A typical decora-shaped light switch has two buttons: Top and Bottom.

Let’s review the operation of the light switches in their default mode:

  • Turn On: Tap the top to turn on the light
  • Turn Off: Tap the bottom to turn off the light
  • Raise Level: Hold top button
  • Dim Level: Hold bottom button
Join the conversation
0% Complete