ReNetA light switches are not like AC switches where you need to purchase 3-way, 4-way, “Dimmer and Follower”, switches just to have more than two switches control a zone of lights. All LumenCache switches are the same!
When more than one switch is configured to control a single zone, the operation is the same as if it was a single switch zone: Top button turns the lights On and the Bottom turns them Off. No more out of sync toggles where two are up and one is down and the light is on, and no more running out of the special switch type you need to finish a job.
ReNetA Switches can be wired to the nearest light. The light and switch don’t even need to be from the same zone.
See more in the Wiring Design chapter.